Contact about our Aurora roofing

Aurora Roofing: Article About Importance Of Asphalt Shingles

Roof Worx: Reliable Roofer Aurora CO
Roof Worx banner

Asphalt shingles have a base material that is either an organic felt or fiberglass. This base material is designed to give the shingle its strength as well as to protect against weather and the elements. This base material is then covered with asphalt, among other fillers, and topped with mineral granules. The outer layer of the shingle is designed to protect it from UV rays as well as improve its fire resistance. Aurora roofing contractors often describe asphalt shingles as the workhorse of the roofing world because of their popularity.

The most popular form of asphalt shingles are strip shingles. They are rectangular in shape and are usually 12 inches in width by 36 inches in length. These are more commonly referred to as three tab shingles because they have three tabs that can be seen along the length of the shingle.

Asphalt shingles may have just one layer. However, more expensive shingles, such as laminated shingles or architectural shingles, may be composed of multiple layers. The more layers a shingle has, the better it is able to protect a roof from the elements. The multiple layers of shingle material used in architectural shingles gives them a three dimensional appearance. Asphalt shingles come manufactured with a sun activated adhesive that seals one course of shingles to the one next to it.

The roofing experts at Roof Worx of Aurora CO can assist you with any questions regarding shingle roofing or roof leak repair.

It is this strip that protects the shingle from wind uplift.

The NRCA recommends that asphalt shingles be used on top of a wood plank or wood decking. Plywood is the most commonly used decking material, and OSB boards come in second. When plywood or OSB is used as recommended, it is required that the planks be of a certain thickness.

An underlayment, or a felt paper, is installed over the roof deck before the shingles are applied. The underlayment serves two important functions. First, it protects the deck from rain and snow. Second, it protects the deck from any water that might filtrate underneath the shingles. Most underlayments are made from asphalt saturated organic felt. These underlayments can be designated type 15 or type 30.

The NRCA recommends that 11 gauge or 12 gauge galvanized steel roofing nails be used as fasteners for asphalt shingles. The nail heads should be flat and smooth and have a low profile. The shanks should have barbs in them or some other deformity that makes it difficult to pull them out once they have been inserted. Using proper materials and techniques guarantee that an asphalt roof will provide the home with maximum protection.

Contact Roof Worx today

For your free estimate, please call us today at (303) 353-1825 or submit the form below.

Contact GAF Master Elite Roofers: Roof Worx

click to call

click to submit form